| Material Technical Datasheet | ||||
| PA66 DP 2851/30 H3.0 000000 | ||||
| FEATURES | APPLICATIONS | |||
| Properties | Test Standard | Units | Values | |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | kg/m³ | 1667 | |
| Shrinkage Flow 150×105×3mm 280'C 50MPa Mold temperature:80°C | ISO 2577 | % | 0.23 | |
| Shrinkage Flow 150×105×3mm 280'C 50MPa Mold temperature:80°C | ISO 2577 | % | 0.81 | |
| Shrinkage Flow 150×105×3mm 120'C 4hr | ISO 2577 | % | 0.04 | |
| Shrinkage xFlow 150×105×3mm 120'C 4hr | ISO 2577 | % | 0.14 | |
| Hardness | ||||
| Dry | Wet | |||
| Ball Indentation Hardness | ISO 2039 | N/mm2 | 250 | 129 |
| Mechanical Properties | ||||
| Dry | Wet | |||
| Tensile Modulus 1.0mm/min | ISO 527 | Mpa | 12400 | 8600 |
| Tensile Strength break 5mm/min | ISO 527 | Mpa | 160 | 105 |
| Elongation Break 5mm/min | ISO 527 | % | 2 | 3 |
| Flexural Strength 2.0mm/min | ISO 178 | Mpa | 235 | 165 |
| Flexural Modulus 2.0mm/min | ISO 178 | Mpa | 10800 | 7300 |
| Flexural Strain 2.0mm/min | ISO 178 | % | 2.6 | 3.4 |
| Izod Notch lmpact 23℃ | ISO 180 | KJ/m2 | 10 | |
| Izod Notch lmpact -30℃ | ISO 180 | KJ/m2 | 10 | |
| Izod Un-notch lmpact 23°C | ISO 180 | KJ/m2 | 45 | 40 |
| Charpy Un-notch lmpact 23°C | ISO 179 | KJ/m2 | 50 | 50 |
| Charpy Un-notch lmpact -30C | ISO 179 | KJ/m2 | 40 | 40 |
| Thermal Properties | ||||
| Properties | Test Standard | Units | Value | |
| HDT 0.45MPa | ISO 75 | ℃ | 245 | |
| HDT 1.8MPa | ISO 75 | ℃ | 221 | |
| Melting Temperature:10'C/min | ISO 11357 | ℃ | 260 | |
| CLE Flow 23~55°C | ISO 11359 | m/m/K | 3E -5 | |
| CLE xFlow 23~55°C | ISO 11359 | m/m/K | 8E -5 | |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| CTl Solution A | IEC 60112 | 400 | V | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.5mm | UL94 | V-0 | ||
| GWFl 1.5mm | IEC 60695 | 960 °C | ||
| Limiting Oxygen Index Method A | 150 4589 | 39.80% | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating ALL 1.5mm | UL94 | V-0 | ||
| HWI ALL 1.5mm | UL 746A | 0 | PLC | |
| HAI ALL 1.5mm | UL 746A | 0 | PLC | |
| RTI Elec ALL 1.5mm | UL 746B | 140 | °C | |
| RTI Imp ALL 1.5mm | UL 746B | 90 | °C | |
| RTI Str ALL 1.5mm | UL 746B | 115 | °C | |
| Injection molding | ||||
| Injection molding | Data | Units | ||
| Dry Temperature | 80 | °C | ||
| Dry Time | 2~6 | hr | ||
| Water Content Control | ≤0.07 | % | ||
| Melt Temperature | 270-290 | °C | ||
| Mould Temperature | 80-100 | °C | ||
Heat Aging resistant /Automotive applications Office Applications Microswitch
Learn More
Copyright © Shanghai Qishen Plastic Industry Co.,ltd. All Rights Reserved.
EN
AR
CS
NL
FI
FR
DE
HI
IT
JA
KO
PL
PT
RU
ES
TL
ID
VI
ET
GL
HU
TH
TR
BE
AZ
BN
BS
LA
UZ
