●FEATURES: Zinc additives freeHigh impactHigh toughnessStress crack resistance
●APPLICATIONS:Decorative trim .Siqnage . Food packaging application
| Material Technical Datasheet | ||||
| HIPS 5300 | ||||
| FEATURES | APPLICATIONS | |||
| Zinc additives free | Decorative trim | |||
| High impact | .Siqnage . Food packaging application | |||
| High toughness | . Exhibis and displays | |||
| Stress crack resistance | ||||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ASTM D792 | 23℃ | g/cm³ | 1.04 |
| Shrinkage Rate | ASTM D955 | in/in | 0.004-0.007 | |
| Melt Flow Rate | ASTM D1238 | 200°C 5kg | g/10min | 2.6 |
| Bulk Density Without external Iubricant | INTERNAL METHOD | lb/ft³ | 37～40 | |
| Bulk Density With external Iubricant | INTERNAL METHOD | lb/ft³ | 42～45 | |
| Rockwell Hardness L(Scale) | ASTM D785 | 45 | ||
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength Yield 23℃ | ASTM D638 | 10mm/min | psi | 2560 |
| Elongation at Break | ASTM D638 | 10mm/min | % | 53 |
| Flexural Strength | ASTM D790 | 2.0mm/min | psi | 6000 |
| Flexural Modulus | ASTM D790 | 2.0mm/min | psi | 250000 |
| Izod Notch Impact | ASTM D256 | 23°C 4.0mm | ft-lb/in | 2.2 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | INTERNAL METHOD | 1.8MPa 4hours | ℉ | 185 |
| Vicat | ASTM D1525 | ℉ | 214 | |
| CLE | ASTM D696 | 0.45MPa 6.4mm | in/in/°F | 5E-05 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Dielectric Strength 3.2mm | ASTM D149 | 400 | KV/in | |
| Dielectric Constant 1MHz 1.0mm | ASTM D150 | 2.5 | ||
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating NC 1.5mm | UL94 | HB | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.5mm | UL94 | HB | ||
| RTI Elec Full Color 1.5mm | UL 746B | 50 | °C | |
| RTI Imp Full Color 1.5mm | UL 746B | 50 | °C | |
| RTI Str Full Color 1.5mm | UL 746B | 50 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Melting temperature | ℉ | 360～530 | ||
| Mould temperature | ℉ | 100～180 | ||
Copyright © Shanghai Qishen Plastic Industry Co.,ltd. All Rights Reserved.
EN
AR
CS
NL
FI
FR
DE
HI
IT
JA
KO
PL
PT
RU
ES
TL
ID
VI
ET
GL
HU
TH
TR
BE
AZ
BN
BS
LA
UZ
