●FEATURES: High gloss High Impact High toughness High resistant
●APPLICATIONS:Office ApplicationsAir Conditioner ·TV .Toilet flushing water tanks
| Material Technical Datasheet | ||||
| HIPS 495N | ||||
| FEATURES | APPLICATIONS | |||
| High gloss | Office Applications | |||
| High flow | Air Conditioner | |||
| High toughness | `TV .Toilet flushing water tanks | |||
| High resistant | Injection molding applications | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23℃ | kg/m³ | 1040 |
| Shrinkage Rate | ISO 294 | % | 0.4~0.7 | |
| Melt Flow Rate | ISO 1133 | 200°C 5kg | cm³/10min | 9.5 |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 10mm/min | Mpa | 2000 |
| Elongation at Break | ISO 527 | 10mm/min | % | 40 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 40 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 2100 |
| Charpy notch impact | ISO 180 | 23°C 1eA | KJ/m² | 17 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ISO 75 | 1.8MPa 6.4mm | ℃ | 85 |
| H.D.T | ISO 75 | 0.45MPa 6.4mm | ℃ | 89 |
| Vicat Softening Temperature | IS0 306 | 50°C/hr 50N | ℃ | 89 |
| CLE | IS0 11359 | cm/cm/°C | 8E-05 | |
| Heat Conductivity Coefficient | DIN 52612 | W/(m`K) | 0.17 | |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume Resistivity | IEC 62631 | 1.00E+16 | Ω.m | |
| Surface Resistivity | IEC 62631-3-1 | 1.00E+13 | Ω | |
| Dielectric Constant100Hz | IEC 62631-2-1 | 2.5 | ||
| Dissipation Factor 100Hz | IEC 62631-2-1 | 0.0004 | ||
| Dissipation Factor 1MHz | IEC 62631-2-1 | 0.0004 | ||
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 0.8mm | UL94 | HB | ||
| Fire Rating Full Color 1.5mm | UL94 | HB | ||
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 0.8mm | UL94 | HB | ||
| RTI Elec Full Color 0.8mm | UL 746B | 50 | °C | |
| RTI Imp Full Color 0.8mm | UL 746B | 50 | °C | |
| RTI Str Full Color 0.8mm | UL 746B | 50 | °C | |
| Fire Rating Full Color 1.5mm | UL94 | HB | ||
| HWI ALL 1.5mm | UL 746A | 4 | PLC | |
| HAI ALL 1.5mm | UL 746A | 1 | PLC | |
| RTI Elec Full Color 1.5mm | UL 746B | 50 | °C | |
| RTI Imp Full Color 1.5mm | UL 746B | 50 | °C | |
| RTI Str Full Color 1.5mm | UL 746B | 50 | °C | |
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| HWI ALL 3.0mm | UL 746A | 3 | PLC | |
| HAI ALL 3.0mm | UL 746A | 1 | PLC | |
| RTI Elec Full Color 3.0mm | UL 746B | 50 | °C | |
| RTI Imp Full Color 3.0mm | UL 746B | 50 | °C | |
| RTI Str Full Color 3.0mm | UL 746B | 50 | °C | |
| GWFl 1.5mm | IEC 60695-2-12 | 750 | °C | |
| GWFI3.0mm | IEC 60695-2-12 | 750 | °C | |
| GWFl 1.5mm | IEC 60695-2-13 | 725 | °C | |
| GWFI3.0mm | IEC 60695-2-13 | 725 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Melting temperature | ℃ | 180～260 | ||
Copyright © Shanghai Qishen Plastic Industry Co.,ltd. All Rights Reserved.
EN
AR
CS
NL
FI
FR
DE
HI
IT
JA
KO
PL
PT
RU
ES
TL
ID
VI
ET
GL
HU
TH
TR
BE
AZ
BN
BS
LA
UZ
