High impact HIPS 485N, China High impact HIPS 485N Manufacturers, Suppliers, Factory - SHANGHAI QISHEN PLASTIC INDUSTRY CO., LTD

Material Technical Datasheet
HIPS 485N
FEATURES		APPLICATIONS
High impact		.Packaging `Film .Extruded profiles applications
Fats Resistant		Extrusion applications
		Sheet extrusion applications


Properties	Test Standard	Test Condition	Units	Typical Values
Physical Properties
Specific Gravity	ISO 1183	23℃	kg/m³	1040
Shrinkage Rate	ISO 294		%	0.4~0.7
Melt Flow Rate	ISO 1133	200°C 5kg	cm³/10min	4
Mechanical Properties
Mechanical Properties	Test Standard	Test Condition	Units	Data
Tensile Modulus	ISO 527	10mm/min	Mpa	1650
Tensile Strength	ISO 527	10mm/min	Mpa	23
Elongation at Yeild	ISO 527		%	1.6
Elongation at Break	ISO 527	10mm/min	%	35
Flexural Strength	ISO 178	2.0mm/min	Mpa	32
Charpy notch impact	ISO 179	23°C 1eA	KJ/m²	10
Thermal Properties
Thermal Properties	Test Standard	Test Condition	Units	Data
Vicat Softening Temperature	IS0 306	50°C/hr 50N	℃	90
CLE	IS0 11359		cm/cm/°C	8E-05
Heat Conductivity Coefficient	DIN 52612		W/(m`K)	0.17
Electrical Performance
Electrical Performance	Test Standard	Data	Units
Volume Resistivity	IEC 62631	1E+16	Ω.m
Surface Resistivity	IEC 62631-3-1	1E+13	Ω
Dielectric Constant100Hz	IEC 62631-2-1	2.5
Dissipation Factor 100Hz	IEC 62631-2-1	0.0004
Dissipation Factor 1MHz	IEC 62631-2-1	0.0004
Flame Retardancy
Flame Retardancy	Test Standard	Data
Fire Rating NC 1.5mm	UL94	HB
UL
Flame Retardancy	Test Standard	Data	Units
Fire Rating NC 1.5mm	UL94	HB
RTI Elec NC 1.5mm	UL 746B	50	°C
RTI Imp NC 1.5mm	UL 746B	50	°C
RTI Str NC 1.5mm	UL 746B	50	°C
Injection Molding
Injection Molding			Units	Data
Melt Temperature			℃	180～260
Mould Temperature			℃	45
Injection Speed			mm/s	200

High impact HIPS 485N