●FEATURES:Good mechanical performance High rigidity Low warpage
●APPLICATIONS:CD/DVD internal holder nternal structure of OA equipment Imaging device housing
| Material Technical Datasheet | ||||
| HIPS 4241 | ||||
| FEATURES | APPLICATIONS | |||
| Good mechanical properties Dimensional stability Good mechanical performance High rigidity Low warpage High temperature resistance | Electronic and electrical applications CD/DVD internal holder Internal structure of OA equipment Imaging device housing Computer plug Precision molding applications | |||
| Dimensional stability | CD/DVD internal holder | |||
| Good mechanical performance | nternal structure of OA equipment | |||
| High Impact | Imaging device housing | |||
| Low warpage | Computer plug | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23℃ | kg/m³ | 1050 |
| Shrinkage Rate | ISO 924 | % | 0.4~0.7 | |
| Water absorption | ISO 62 | % | 0.1 | |
| Melt Flow Rate | ISO 1133 | 200°C 5kg | % | 4 |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Modulus | ISO 527 | Mpa | 2100 | |
| Tensile Strength | ISO 527 | 10mm/min | Mpa | 26 |
| Elongation at Break | ISO 527 | 10mm/min | % | 55 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 40 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 2000 |
| Cantilever notch impact | ISO 180 | 23°C 4.0mm | KJ/m² | 10 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ISO 75 | 1.8MPa 6.4mm | ℃ | 74 |
| H.D.T | ISO 75 | 0.45MPa 6.4mm | ℃ | 90 |
| Vicat SofteningTemperature 50'C/hr 10N | IS0 306 | ℃ | 89 | |
| Vicat SofteningTemperature 50°C/hr 50N | IS0 306 | ℃ | 97 | |
| CLE Flow | IS0 11359 | cm/cm/°C | 9.1E-05 | |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Surface Resistance | IEC 60093 | 1E13 | Ω.com | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.5mm | UL94 | HB | ||
| Fire Rating Full Color 1.7mm | UL94 | HB | ||
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| Fire Rating natural color 1.5mm | UL94 | HB | ||
| RTI Elec Full Color 1.5mm | UL 746B | 50 | °C | |
| RTI Imp Full Color 1.5mm | UL 746B | 50 | °C | |
| RTI Str Full Color 1.5mm | UL 746B | 50 | °C | |
| Fire Rating Full Color 1.7mm | UL94 | HB | ||
| RTI Elec Full Color 1.7mm | UL 746B | 50 | °C | |
| RTI Imp Full Color 1.7mm | UL 746B | 50 | °C | |
| RTI Str Full Color 1.7mm | UL 746B | 50 | °C | |
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| RTI Elec Full Color 3.0mm | UL 746B | 50 | °C | |
| RTI Imp Full Color 3.0mm | UL 746B | 50 | °C | |
| RTI Str Full Color 3.0mm | UL 746B | 50 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 110～120 | ||
| Drying Time | h | 3～4 | ||
| Front Temperature | ℃ | 240～270 | ||
| Middle Temperature | ℃ | 240～285 | ||
| Temperature of The Third Section | ℃ | 245～290 | ||
| Melting temperature | ℃ | 245～285 | ||
| Maximum melting temperature | ℃ | 310 | ||
| Mold Temperature | ℃ | 40～100 | ||
| Injection speed | Low High Speed | |||
Copyright © Shanghai Qishen Plastic Industry Co.,ltd. All Rights Reserved.
EN
AR
CS
NL
FI
FR
DE
HI
IT
JA
KO
PL
PT
RU
ES
TL
ID
VI
ET
GL
HU
TH
TR
BE
AZ
BN
BS
LA
UZ
