● Material shape: granular
● Processing method: injection molding
● Flame retardant grade: HB
● Material properties: high heat resistance
● Compliance: UL
● Material characteristics: good mechanical performance balance, high temperature resistance, good processability
● Material use: Home appliance application · Injection molding application
| Material Technical Datasheet | ||||
| PP HT K05 | ||||
| PROPERTY | ||||
| High heat resistance grade | ||||
| FEATURES | APPLICATIONS | |||
| Good mechanical balance | Home appliance components | |||
| High temperature resistance | Injection molding application | |||
| Good workability | ||||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ASTM D792 | 23℃ | g/cm³ | 0.97 |
| Shrinkage Rate | ASTM D995 | 23℃ | % | 1.3~1.6 |
| Melt index 230°C 2.16kg | ASTM D1238 | 16 | g/10min | 12 |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength 23°C | ASTM D638 | 10mm/min | Mpa | 33 |
| Elongation at Break 23°C | ASTM D638 | 10mm/min | % | 50 |
| Flexural Strength 23°C | ASTM D790 | 2.0mm/min | Mpa | 45 |
| Flexural Modulus 23°C | ASTM D790 | 2.0mm/min | Mpa | 1600 |
| Cantilever notch impact 23°C | ASTM D256 | 23 ° C A-notch | J/m | 40 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ASTM D648 | 0.45MPa | ℃ | 118 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume resistance | ASTM D257 | 1E16 | Ω.cm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.6mm | UL94 | HB | ||
| Fire Rating Full Color 3.2mm | UL94 | HB | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.6mm | UL94 | HB | ||
| Fire Rating Full Color 3.2mm | UL94 | HB | ||
| RTI Elec Full color 1.6mm | UL 746B | 65 | °C | |
| RTI Elec Full color3.2mm | UL 746B | 65 | °C | |
| RTI Imp Full color 1.6mm | UL 746B | 65 | °C | |
| RTI Imp Full color 3.2mm | UL 746B | 65 | °C | |
| RTI Str Full color 1.6mm | UL 746B | 65 | °C | |
| RTI Str Full color 3.2mm | UL 746B | 65 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 90 | ||
| Drying Time | hr | 2 | ||
| Front Temperature | ℃ | 180~210 | ||
| Middle Temperature | ℃ | 190~230 | ||
| Temperature of The Third Section | ℃ | 200~240 | ||
| Melting temperature | ℃ | 190~245 | ||
| Maximum melting temperature | ℃ | 260 | ||
| Mold Temperature | ℃ | 30~60 | ||
| Injection speed | Medium speed | |||
| Back pressure | KPa | 10 | ||
HB Flame retardant grade/ high heat resistance
Learn More
Copyright © Shanghai Qishen Plastic Industry Co.,ltd. All Rights Reserved.
EN
AR
CS
NL
FI
FR
DE
HI
IT
JA
KO
PL
PT
RU
ES
TL
ID
VI
ET
GL
HU
TH
TR
BE
AZ
BN
BS
LA
UZ
