Flame retardant and high heat resistance abs granules

● Color: Color is optional

● Material shape: granular

● Processing method: injection molding

● Flame retardant grade :V-0 5VA

● Material properties: flame retardant and high heat resistance

● Compliance: UL

● Material characteristics: good weather resistance and good processability

● Material use: Display, electronic appliance application, switch, IT equipment, OA equipment, controller, injection molding application

● Additive: flame retardant

Inquiry Add to cart

Parameter

Material Technical Datasheet
ABS FRHT K0HF
Material Properties
Flame retardant and heat resistant grade
FEATURES		APPLICATIONS
		monitor
Good weather resistance		Electronic and Electrical Applications
Good processability		Injection molding applications
		OA device
Properties	Test Standard	Test Condition	Units	Typical Values
Physical Properties
Specific Gravity	ISO 1183	23°C	g/cm³	1.185
Shrinkage Rate	ISO 294	23°C	%	0.4～0.6
Melt index	ISO 1133	200°C 5kg	g/10min	4.2
Melt index	ISO 1133	220°C 10kg	g/10min	45
Hardness
Mechanical Properties	Test Standard	Test Condition	Units	Data
Rockwell hardness R scale	ISO 2039			101
Mechanical Properties
Mechanical Properties	Test Standard	Test Condition	Units	Data
Tensile Strength	ISO 527	50mm/min	Mpa	41
Elongation at Break	ISO 527	50mm/min	%	7
Flexural Strength	ISO 178	2.0mm/min	Mpa	62
Flexural Modulus	ISO 178	2.0mm/min	Mpa	2200
Cantilever beam notch impact	ISO 180	23 ° C 4.0mm A-notch	KJ/m2	16
Thermal Properties
Thermal Properties	Test Standard	Test Condition	Units	Data
Thermal deformation temperature	ISO 75	0.45MPa 4.0mm	℃	86
Thermal deformation temperature	ISO 75	1.8MPa 4.0mm	℃	78
Vicat softening temperature	ISO 306	120°C/hr 10N	℃	97
Vicat softening temperature	ISO 306	50°C/hr 50N	℃	87
Electrical Performance
Electrical Performance	Test Standard	Data	Units
Volume resistance	IEC 60093	1E14	Ω
Insulation Strength 2.0mm	IEC 60243	22	KV/mm
Flame Retardancy
Flame Retardancy	Test Standard	Data
Fire Rating Full Color 1.5mm	UL94	V-0
Fire Rating Full Color 2.0mm	UL94	V-0 5VA
Fire Rating Full Color 2.5mm	UL94	V-0 5VA
Fire Rating Full Color 3.2mm	UL94	V-0 5VA
UL
Flame Retardancy	Test Standard	Data	Units
Fire Rating Full Color 1.5mm	UL94	V-0
Fire Rating Full Color 2.0mm	UL94	V-0 5VB
Fire Rating Full Color 2.5mm	UL94	V-0 5VA
Fire Rating Full Color 3.2mm	UL94	V-0 5VA
HWI Full Color 1.5mm	UL 746A	4	PLC
HWI Full Color 2.0mm	UL 746A	4	PLC
HWI Full Color 2.5mm	UL 746A	4	PLC
HWI Full Color 3.2mm	UL 746A	0	PLC
HAI Full Color 1.5mm	UL 746A	0	PLC
HAI Full Color 2.0mm	UL 746A	0	PLC
HAI Full Color 2.5mm	UL 746A	0	PLC
HAI Full Color 3.2mm	UL 746A	0	PLC
RTI Elec Full Color 1.5mm	UL 746B	60	°C
RTI Elec Full Color 2.0mm	UL 746B	60	°C
RTI Elec Full Color 2.5mm	UL 746B	60	°C
RTI Elec Full Color 3.2mm	UL 746B	60	°C
RTI Imp Full Color 1.5mm	UL 746B	60	°C
RTI Imp Full Color 2.0mm	UL 746B	60	°C
RTI Imp Full Color 2.5mm	UL 746B	60	°C
RTI Imp Full Color 3.2mm	UL 746B	60	°C
RTI Str Full Color 1.5mm	UL 746B	60	°C
RTI Str Full Color 2.0mm	UL 746B	60	°C
RTI Str Full Color 2.5mm	UL 746B	60	°C
RTI Str Full Color 3.2mm	UL 746B	60	°C
CTI	IEC 60112	0	PLC
Injection Molding
Injection Molding			Units	Data
Drying Temperature			℃	75～85
Drying Time			h	2～4
Front Temperature			℃	180～200
Middle Temperature			℃	190～210
Temperature of The Third Section			℃	200～220
Melting temperature			℃	190~220
Maximum melting temperature			℃	240
Mold Temperature			℃	30～60
Injection speed			Medium and low speed

All Categories

Flame retardant and high heat resistance abs granules

Parameter

Recommended products

Flame retardant injection molding Modified ABS

Flame retardant and high heat resistance injection molding abs material

Leave us a message

Hot categories

subscribe