● Material shape: granular
● Processing method: injection molding
● Flame retardant grade :V-0
● Material properties: 30% glass fiber reinforced halogen-free flame retardant
● Compliance: UL
● Material characteristics: good appearance, frost free, dimensional stability, good mechanical properties, chemical coupling
● Material use: home appliance parts, structural parts, injection molding applications
● Additive: flame retardant
| Material Technical Datasheet | ||||
| PP FRG6 K0NP | ||||
| FEATURES | APPLICATIONS | |||
| Non-blooming | Electronic and electrical applications | |||
| Good mechanical performance | Home appliance components | |||
| Chemical coupling | Structural components | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23℃ | g/cm³ | 1.29 |
| Shrinkage Rate | ISO 2577 | 23℃ | % | 0.3 |
| Ash content | ISO 3451 | % | 30 | |
| Hardness | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Rockwell hardness R scale | ISO 2039 | 110 | ||
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 10mm/min | Mpa | 80 |
| Elongation at Break | ISO 527 | 10mm/min | % | 3 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 110 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 5800 |
| Cantilever notch impact | ISO 180 | 23 ° C A-notch | KJ/m2 | 9 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ISO 75 | 0.45MPa | ℃ | 150 |
| H.D.T | ISO 75 | 1.8MPa | ℃ | 140 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Bulk resistance | IEC 60093 | 1E12 | Ω | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.5mm | UL94 | V-0 | ||
| Fire Rating Full Color 3.0mm | UL94 | V-0 | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.5mm | UL94 | V-0 | ||
| Fire Rating Full Color 3.0mm | UL94 | V-0 | ||
| HWI Full color 1.5mm | UL 746A | 1 | PLC | |
| HWI Full color 3.0mm | UL 746A | 0 | PLC | |
| HAI Full color 1.5mm | UL 746A | 0 | PLC | |
| HAI Full color 3.0mm | UL 746A | 0 | PLC | |
| RTI Elec Full color 1.5mm | UL 746B | 65 | °C | |
| RTI Elec Full color3.0mm | UL 746B | 65 | °C | |
| RTI Imp NFull color 1.5mm | UL 746B | 65 | °C | |
| RTI Imp Full color 3.0mm | UL 746B | 65 | °C | |
| RTI Str Full color 1.5mm | UL 746B | 65 | °C | |
| RTI Str Full color 3.0mm | UL 746B | 65 | °C | |
| CTI | IEC 60112 | 0 | PLC | |
| Insulation strength | ASTM D149 | 23 | KV/mm | |
| HVTR | UL 746A | 1 | PLC | |
| GWFI 1.5mm | IEC 60695-2-12 | 960 | °C | |
| GWFI 3.0mm | IEC 60695-2-12 | 960 | °C | |
| GWIT 1.5mm | IEC 60695-2-13 | 750 | °C | |
| GWIT 3.0mm | IEC 60695-2-13 | 750 | °C | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 80~90 | ||
| Drying Time | h | 2~4 | ||
| Front Temperature | ℃ | 180～200 | ||
| Middle Temperature | ℃ | 170～190 | ||
| Temperature of The Third Section | ℃ | 170～190 | ||
| Melting temperature | ℃ | 170~200 | ||
| Maximum melting temperature | ℃ | 210 | ||
| Mold Temperature | ℃ | 30～60 | ||
| Injection speed | Medium and high speed | |||
V-0 Flame retardant grade/ 20% glass fiber reinforced
Learn More
HB Flame retardant grade/ 30% glass fiber reinforced
Learn More
HB Flame retardant grade/ 40% glass fiber reinforced
Learn More
HB Flame retardant grade/ 50% glass fiber reinforced
Learn More
Copyright © Shanghai Qishen Plastic Industry Co.,ltd. All Rights Reserved.
EN
AR
CS
NL
FI
FR
DE
HI
IT
JA
KO
PL
PT
RU
ES
TL
ID
VI
ET
GL
HU
TH
TR
BE
AZ
BN
BS
LA
UZ