PC/ABS FRG3 K2 V-2 Flame retardant grade 15% glass fiber reinforced flame retardant high heat resistance grade alloy

● Material shape: granular

● Processing method: injection molding

● Flame retardant grade :V-2

● Material properties: 15% glass fiber reinforced flame retardant high heat resistance grade alloy

● Compliance: UL

● Material characteristics: Good surface, dimensional stability, good mechanical properties, high rigidity, low warpage and high temperature resistance

● Material use: Electronic and electrical applications, CD/DVD player internal bracket, TV, OA equipment internal structure, imaging equipment housing computer plug, precision molding applications

Inquiry Add to cart

Description

PC/ABS alloy has the machinability and low temperature resistance of ABS, as well as the high impact and heat resistance of PC. It can be used in automobile parts, 3C electronic products shell, consumer electronic components, household appliances shell, toys, plates and other products. Its application end is diversified. Our factory has high standard production equipment and test factory, with the ability to develop new materials and processing technology services, in addition, the factory equipment also adopts strict environmental standards, with mature production technology, pollution-free environment doubt.

Parameter

Material Technical Datasheet
PC/ABS FRG3 K2
FEATURES		APPLICATIONS
Good surfaceDimensional stabilityGood mechanical performanceHigh rigidityLow warpageHigh temperature resistance		Electronic and electrical applicationsCD/DVD internal holderInternal structure of OA equipmentImaging device housingComputer plugPrecision molding applications
Dimensional stability		CD/DVD internal holder
Good mechanical performance		nternal structure of OA equipment
High rigidity		Imaging device housing
Low warpage		Computer plug
Properties	Test Standard	Test Condition	Units	Typical Values
Physical Properties
Specific Gravity	ISO 1183	23℃	g/cm³	1.28
Shrinkage Rate	ISO 2577		%	0.3~0.5
Ash Content	ISO 3451	825°C 40min	%	15
Mechanical Properties
Mechanical Properties	Test Standard	Test Condition	Units	Data
Tensile Strength	ISO 527	10mm/min	Mpa	80
Elongation at Break	ISO 527	10mm/min	%	5
Flexural Strength	ISO 178	2.0mm/min	Mpa	125
Flexural Modulus	ISO 178	2.0mm/min	Mpa	4500
Cantilever notch impact	ISO 180	23°C 4.0mm	J/m2	8
Cantilever beam impact without notch	ISO 180	23°C 4.0mm	J/m2	50
Thermal Properties
Thermal Properties	Test Standard	Test Condition	Units	Data
H.D.T	ISO 75	1.8MPa 4.0mm	℃	120
Electrical Performance
Electrical Performance	Test Standard	Data	Units
Bulk resistance	IEC 60093	1.00E+16	Ω
Insulation Strength 1.6mm	IEC 60243	28	KV/mm
Flame Retardancy
Flame Retardancy	Test Standard	Data
Fire Rating Full Color 0.8mm	UL94	V-2
Fire Rating Full Color 3.0mm	UL94	V-2
UL
Flame Retardancy	Test Standard	Data	Units
Fire Rating Full Color 0.8mm	UL94	V-2
Fire Rating Full Color 3.0mm	UL94	V-2
HWI Full Color 0.8mm	UL 746A	2	PLC
HWI Full Color 3.0mm	UL 746A	1	PLC
HAI Full Color 0.8mm	UL 746A	2	PLC
HAI Full Color 3.0mm	UL 746A	1	PLC
RTI Elec Full Color 0.8mm	UL 746B	60	°C
RTI Elec Full Color 3.0mm	UL 746B	60	°C
RTI Imp Full Color 0.8mm	UL 746B	60	°C
RTI Imp Full Color 3.0mm	UL 746B	60	°C
RTI Str Full Color 0.8mm	UL 746B	60	°C
RTI Str Full Color 3.0mm	UL 746B	60	°C
CTI	IEC 60112	3	PLC
GWFI 0.8mm	IEC 60695-2-12	960	°C
GWFI 3.0mm	IEC 60695-2-12	960	°C
GWIT 0.8mm	IEC 60695-2-13	825	°C
GWIT 3.0mm	IEC 60695-2-13	750	°C
Injection Molding
Injection Molding			Units	Data
Drying Temperature			℃	110～120
Drying Time			h	3～4
Front Temperature			℃	230～260
Middle Temperature			℃	250～300
Temperature of The Third Section			℃	235～275
Melting temperature			℃	230~300
Maximum melting temperature			℃	310
Mold Temperature			℃	80～120
Injection speed			Medium and low speed