AS G4 K01 20% glass fiber reinforced plastic pellets

● Material shape: granular

● Processing method: injection molding

● Flame retardant grade :HB

● Material properties: 20% glass fiber reinforced

● Compliance: UL

● Material characteristics: dimensional stability, low shrinkage, good mechanical properties, low warpage

● Material use: axial flow fan, centrifugal fan, cross-flow fan, injection molding application

Inquiry Add to cart

Parameter

Material Technical Datasheet
AS G4 K01
PROPERTY
20% glass fiber reinforced
FEATURES		APPLICATIONS
Dimensional stability		Axial fans
Low shrinkage		Centrifugal fans
Good mechanical properties		Cross flow fans
Low warpage		Injection molding applications
Properties	Test Standard	Test Condition	Units	Typical Values
Physical Properties
Specific Gravity 23°C	ISO 1183	23℃	g/cm³	1.22
Shrinkage Rate Flow 23°C	ISO 2577	23℃	%	0.1~0.3
Melt index 230°C 5kg	ISO 1133	23℃	%	15
Mechanical Properties
Mechanical Properties	Test Standard	Test Condition	Units	Data
Tensile Strength 10mm/min	ISO 527	10mm/min	Mpa	115
Elongation at Break 10mm/min	ISO 527	10mm/min	%	2
Flexural Strength2.0mm/min	ISO 178	2.0mm/min	Mpa	155
Flexural Modulus 2.0mm/min	ISO 178	2.0mm/min	Mpa	7100
Cantilever notch impact 23°C	ISO 180	23 ° C A-notch	kJ/m²	6.5
Thermal Properties
Thermal Properties	Test Standard	Test Condition	Units	Data
Thermal deformation temperature	ISO 75	0.45MPa	℃	102
Vica softening temperature	ISO 306	1.8MPa	℃	112
Electrical Performance
Electrical Performance	Test Standard	Data	Units
Volume resistance	IEC 60093	1E16	Ω.cm
Insulation strength 2.0mm in oil	IEC 60243	23	KV/mm
Flame Retardancy
Flame Retardancy	Test Standard	Data
Fire Rating Full Color black 1.6mm	UL94	HB
Fire Rating Full Color black 3.2mm	UL94	HB
UL
Flame Retardancy	Test Standard	Data	Units
Fire Rating Full Color black 1.6mm	UL94	HB
Fire Rating Full Color black 3.2mm	UL94	HB
RTI Elec Full color black 1.6mm	UL 746B	50	°C
RTI Elec Full color black 3.2mm	UL 746B	50	°C
RTI Imp Full color black 1.6mm	UL 746B	50	°C
RTI Imp Full color black 3.2mm	UL 746B	50	°C
RTI Str Full color black 1.6mm	UL 746B	50	°C
RTI Str Full color black 3.2mm	UL 746B	50	°C
Injection Molding
Injection Molding			Units	Data
Drying Temperature			℃	80~90
Drying Time			hr	2~4
Front Temperature			℃	190~215
Middle Temperature			℃	210~250
Temperature of The Third Section			℃	220~260
Melting temperature			℃	210~250
Maximum melting temperature			℃	260
Mold Temperature			℃	40~90
Injection speed			Low to medium speed
Back pressure			KPa	0.0~1000

All Categories

AS G4 K01 20% glass fiber reinforced plastic pellets

Parameter

Recommended products

AS G2 K01 10% glass fiber reinforced plastic material

Leave us a message

Hot categories

subscribe