PC/ABS FR K6300HG halogen-free flame retardant alloy

● Material shape: granular

● Processing method: injection molding

● Flame retardant grade :V-0 5VB 5VA

● Material properties: halogen-free flame retardant alloy

● Compliance: UL

● Material characteristics: high gloss, good mechanical properties, chemical resistance can be sprayed

● Material use: Electronic appliance application · Injection molding application TV

● Additive: flame retardant

Inquiry Add to cart

Description

PC/ABS alloy has the machinability and low temperature resistance of ABS, as well as the high impact and heat resistance of PC. It can be used in automobile parts, 3C electronic products shell, consumer electronic components, household appliances shell, toys, plates and other products. Its application end is diversified. Our factory has high standard production equipment and test factory, with the ability to develop new materials and processing technology services, in addition, the factory equipment also adopts strict environmental standards, with mature production technology, pollution-free environment doubt.

Parameter

Material Technical Datasheet
PC/ABS FR K6300HG
FEATURES		APPLICATIONS
High Gloss		Electronic and electrical applications
Good mechanical properties		Injection Molding Applications
Chemical resistance		Television
Properties	Test Standard	Test Condition	Units	Typical Values
Physical Properties
Specific Gravity	ASTM D792	23℃		1.19
Melt Flow Rate	ASTM D1238	260℃,2.16KG	g/10min	19
Mold Shrinkage	ASTM D955	23℃	%	0.5～0.7
Mechanical Properties
Mechanical Properties	Test Standard	Test Condition	Units	Data
Tensile Strength	ASTM D638	50 mm/min, 23℃	Mpa	60
Elongation at Break	ASTM D638	50 mm/min, 23℃	%	50
Flexural Strength	ASTM D790	2 mm/min, 23℃	Mpa	90
Flexural Modulus	ASTM D790	2 mm/min, 23℃	Mpa	2600
Impact Strength, Notched	ASTM D256	23°C 3.2mm	J/m2	350
Impact Strength, Notched	ASTM D256	-10°C 3.2mm	J/m2	280
Thermal Properties
Thermal Properties	Test Standard	Test Condition	Units	Data
H.D.T	ASTM D648	0.45MPa 6.4mm	℃	100
H.D.T	ASTM D648	1.8MPa 6.4mm	℃	88
Electrical Performance
Electrical Performance	Test Standard	Data	Units
Surface Resistance	ASTM D257	1E+15	Ω
Insulation Strength 1.6mm	ASTM D149	19	KV/mm
Flame Retardancy
Flame Retardancy	Test Standard	Data
Fire Rating Full Color 1.5mm	UL94	V-0 5VB
Fire Rating Full Color 1.6mm	UL94	V-0 5VB
Fire Rating Full Color 3.2mm	UL94	V-0 5VA
UL
Flame Retardancy	Test Standard	Data	Units
Fire Rating Full Color 1.5mm	UL94	V-0 5VB
Fire Rating Full Color 1.6mm	UL94	V-0 5VB
Fire Rating Full Color 3.2mm	UL94	V-0 5VA
HWI Full Color 1.5mm	UL 746A	3	PLC
HWI Full Color 1.6mm	UL 746A	3	PLC
HWI Full Color 3.2mm	UL 746A	2	PLC
HAI Full Color 1.6mm	UL 746A	0	PLC
HAI Full Color 3.2mm	UL 746A	0	PLC
RTI Elec Full Color 1.5mm	UL 746B	60	°C
RTI Elec Full Color 1.6mm	UL 746B	60	°C
RTI Elec Full Color 3.2mm	UL 746B	60	°C
RTI Imp Full Color 1.5mm	UL 746B	60	°C
RTI Imp Full Color 1.6mm	UL 746B	60	°C
RTI Imp Full Color 3.2mm	UL 746B	60	°C
RTI Str Full Color 1.5mm	UL 746B	60	°C
RTI Str Full Color 1.6mm	UL 746B	60	°C
RTI Str Full Color 3.2mm	UL 746B	60	°C
Injection Molding
Injection Molding			Units	Data
Drying Temperature			℃	80～90
Drying Time			h	3～4
Front Temperature			℃	220～255
Middle Temperature			℃	230～265
Temperature of The Third Section			℃	235～275
Melting temperature			℃	230~275
Maximum melting temperature			℃	280
Mold Temperature			℃	40～80
Injection speed			Low High Speed