HIPS FR K02 plastic modified material granule

● Color: Color is optional

● Material shape: granular

● Processing method: injection molding

● Flame retardant grade :HB V-0 5VA

● Material properties: flame retardant heat stable level

● Compliance: UL

● Material characteristics: good electrical performance

● Material use: Electronic product cabinet, gas-assisted injection molding (GIT) application, injection molding application

● Additive: flame retardant

Inquiry Add to cart

Parameter

Material Technical Datasheet
HIPS FR K02
PROPERTY
10% glass fiber reinforced
FEATURES		APPLICATIONS
High gloss		Electronics cabinet
High impact		Gas-assisted Injection Molding (GIT) applications
		Injection molding applications
Properties	Test Standard	Test Condition	Units	Typical Values
Physical Properties
Specific Gravity 23°C	ISO 1183	23℃	g/cm³	1.15
Shrinkage Rate Flow 23°C	ISO 2577	23℃	%	0.4~0.6
Melt index 230°C 5kg	ISO 1133	23℃	%	8
Hardness
Mechanical Properties	Test Standard	Test Condition	Units	Data
Rockwell hardness R scale	ISO 2039			101
Mechanical Properties
Mechanical Properties	Test Standard	Test Condition	Units	Data
Tensile Strength 50mm/min	ISO 527	50mm/min	Mpa	23
Elongation at Break 50mm/min	ISO 527	50mm/min	%	30
Flexural Strength 2.0mm/min	ISO 178	2.0mm/min	Mpa	35
Flexural Modulus 2.0mm/min	ISO 178	2.0mm/min	Mpa	2000
Cantilever notch impact 23°C A-notch	ISO 180	23 ° C A-notch	kJ/m²	8.0
Thermal Properties
Thermal Properties	Test Standard	Test Condition	Units	Data
H.D.T 0.45MPa 4.0mm	ISO 75	0.45MPa	℃	81
H.D.T 1.8MPa 4.0mm	ISO 75	1.8MPa	℃	72
Thermal deformation temperature	ISO 306	0.45MPa	℃	94
Vica softening temperature	ISO 306	1.8MPa	℃	85
Electrical Performance
Electrical Performance	Test Standard	Data	Units
Volume resistance	IEC 60093	1E16	Ω.cm
Insulation strength	IEC 60243	22	KV/mm
Flame Retardancy
Flame Retardancy	Test Standard	Data
Fire Rating Full Color 0.8mm	UL94	HB
Fire Rating Full Color 1.6mm	UL94	V-0
Fire Rating Full Color 2.5mm	UL94	V-0 5VA
Fire Rating Full Color 3.0mm	UL94	V-0 5VA
UL
Flame Retardancy	Test Standard	Data	Units
Fire Rating Full Color 0.8mm	UL94	HB
Fire Rating Full Color 1.6mm	UL94	V-0
Fire Rating Full Color 2.5mm	UL94	V-0 5VA
Fire Rating Full Color 3.0mm	UL94	V-0 5VA
HWI Full color 1.6mm	UL 746A	3	PLC
HWI Full color 2.5mm	UL 746A	3	PLC
HWI Full color 3.0mm	UL 746A	3	PLC
HAI Full color 1.6mm	UL 746A	0	PLC
HAI Full color 2.5mm	UL 746A	0	PLC
HAI Full Color 3.0mm	UL 746A	0	PLC
RTI Elec Full color 0.8mm	UL 746B	50	°C
RTI Elec Full color 1.6mm	UL 746B	50	°C
RTI Elec Full color 2.5mm	UL 746B	50	°C
RTI Elec Full color 3.0mm	UL 746B	50	°C
RTI Imp Full color 0.8mm	UL 746B	50	°C
RTI Imp Full color 1.6mm	UL 746B	50	°C
RTI Imp Full color 2.5mm	UL 746B	50	°C
RTI Imp Full color 3.0mm	UL 746B	50	°C
RTI Str Full color 0.8mm	UL 746B	50	°C
RTI Str Full color 1.6mm	UL 746B	50	°C
RTI Str Full color 2.5mm	UL 746B	50	°C
RTI Str Full color 3.0mm	UL 746B	50	°C
CTI	IEC 60112	0	PLC
GWFI 1.6mm	IEC 60695-2-12	960	°C
GWFI 3.0mm	IEC 60695-2-12	960	°C
GWIT 1.5mm	IEC 60695-2-13	675	°C
GWIT 3.0mm	IEC 60695-2-13	700	°C
Injection Molding
Injection Molding			Units	Data
Drying Temperature			℃	70
Drying Time			hr	2~4
Front Temperature			℃	182~205
Middle Temperature			℃	205~230
Temperature of The Third Section			℃	215~240
Melting temperature			℃	220~245
Maximum melting temperature			℃	250
Mold Temperature			℃	30~60
Injection speed			Low to medium speed
Back pressure			KPa	5~15

All Categories

HIPS FR K02 plastic modified material granule

Parameter

Recommended products

Leave us a message

Hot categories

subscribe