● Material shape: granular
● Processing method: injection molding
● Flame retardant grade :HB
● Material properties: UV resistance
● Compliance: UL
● Material characteristics: high gloss and high impact
● Material use: electronic products cabinet, injection molding applications
● Additive: anti-UV agent
| Material Technical Datasheet | ||||
| ABS UV K01 | ||||
| Material Properties | ||||
| UV resistance level | ||||
| FEATURES | APPLICATIONS | |||
| High gloss | Electronic product cabinet | |||
| High impact | Injection molding applications | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23°C | g/cm³ | 1.04 |
| Shrinkage Rate | ISO 294 | 23°C | % | 0.4～0.7 |
| Melt index | ISO 1133 | 220°C 10kg | g/10min | 25 |
| Hardness | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Rockwell hardness R scale | ISO 2039 | 110 | ||
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 50mm/min | Mpa | 45 |
| Elongation at Break | ISO 527 | 50mm/min | % | 15 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 68 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 2300 |
| Cantilever beam notch impact | ISO 180 | 23 ° C | KJ/m2 | 20 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| Thermal deformation temperature | ISO 75 | 1.8MPa 4.0mm | ℃ | 83 |
| Vicat softening temperature | ISO 306 | 120°C/hr 10N | ℃ | 95 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume resistance | IEC 60093 | 1E14 | Ω | |
| Insulation Strength 2.0mm | IEC 60243 | 23 | KV/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.2mm | UL94 | HB | ||
| Fire Rating Full Color 1.6mm | UL94 | HB | ||
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.2mm | UL94 | HB | ||
| Fire Rating Full Color 1.6mm | UL94 | HB | ||
| Fire Rating Full Color 3.0mm | UL94 | HB | ||
| HWI Full Color 1.6mm | UL 746A | 3 | PLC | |
| HWI Full Color 3.0mm | UL 746A | 2 | PLC | |
| HAI Full Color 1.6mm | UL 746A | 0 | PLC | |
| HAI Full Color 3.0mm | UL 746A | 0 | PLC | |
| RTI Elec Full Color 1.6mm | UL 746B | 60 | °C | |
| RTI Elec Full Color 3.0mm | UL 746B | 60 | °C | |
| RTI Imp Full Color 1.6mm | UL 746B | 60 | °C | |
| RTI Imp Full Color 3.0mm | UL 746B | 60 | °C | |
| RTI Str Full Color 1.6mm | UL 746B | 60 | °C | |
| RTI Str Full Color 3.0mm | UL 746B | 60 | °C | |
| CTI | IEC 60112 | 0 | PLC | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ℃ | 80～90 | ||
| Drying Time | h | 2～4 | ||
| Front Temperature | ℃ | 180～205 | ||
| Middle Temperature | ℃ | 205～230 | ||
| Temperature of The Third Section | ℃ | 215～240 | ||
| Melting temperature | ℃ | 210~240 | ||
| Maximum melting temperature | ℃ | 250 | ||
| Mold Temperature | ℃ | 30～80 | ||
| Injection speed | Medium and low speed | |||
Copyright © Shanghai Qishen Plastic Industry Co.,ltd. All Rights Reserved.
EN
AR
CS
NL
FI
FR
DE
HI
IT
JA
KO
PL
PT
RU
ES
TL
ID
VI
ET
GL
HU
TH
TR
BE
AZ
BN
BS
LA
UZ